Propane Tank Regulations
The liquid petroleum or LP system style gas container is an OSHA term that refers to the piping, regulators, hoses, regulators, valves and fittings. The agency needs specific parts depending upon the capacity of the tank. These individual components should undergo recognized laboratory testing. The right laboratory approval would show that the system components meet pressure, thickness and construction standards.
Tank Location
The organization OSHA determines how close the propane tank could be mounted in relation to ignitable materials, to buildings, to tanks that contain inflammable liquids, cutting torches and welders. These strict rules are in place to make the jobsite really safe for the workers and those others who are in close proximity.
Nameplate Marks
Liquefied Propane systems have to be marked with the name and the address of the container supplier, or tank trade name. The capacity of the container is listed in gallons or pounds, square foot outside surface, fill level, and pressure. In addition, details regarding whether or not the container is designed to be installed above ground or underground is also visible. These markings must be on a metal plate attached somewhere noticeable to the container. OSHA requires that every tank must be marked by the Pressure Vessel Inspectors and National Board of Boiler in order to be considered safe and ready to use.
Tank Modifications and Repairs
OSHA also regulates any kind of maintenance to the LP systems, such as welding. The workers performing repairs and the tank owners should understand the regulatory codes and standards that the tanks were made. Welding repairs to any part of the system that is subject to internal pressure should first comply with these fabrication codes. Other welding is only allowed on brakctes, saddle plates or lugs.
OSHA has worked hard to make certain that individuals working with forklifts and those working in the vicinity of lift trucks are kept as safe as possible. They have stringent rules and training procedures in place so as to make sure that these industrial equipment and their repair processes are handled as safe as possible and with respect. It is very important that companies follow their rules and steep fines could happen if they are not adhered to.