Forklift Attachments Kansas - Without forklift attachments, many jobs would be difficult, if not impossible. Forklift attachments make many jobs safer, easier and quicker to complete. Forklift operators require training for each attachment they will be using as well as their general forklift training.
There are many non-hydraulic attachments and hydraulic attachments available for forklift attachments. They provide many benefits including decreasing fuel consumption, time, man-power, damage to stock and employee accidents.
Equipment Considerations
Forklift attachments can be switched out to replace existing attachments or may be used on machines that don’t currently have one. There are many equipment factors to consider prior to adding or replacing any forklift attachments. Considerations include the carriage type, the forklift model, the capacity of the forklift and the number of hydraulic functions used to power the features of the attachment.
Not considering these issues will drastically increase the safety risks associated with operating the machine and its attachments. This can increase risks relating to operator safety, forklift damage, stock damage and more. There are further safety issues to take into consideration which can be discussed in more detail below.
Forklift Rating and Re-Rating
Manufacturers give forklifts a lift capacity rating that needs to be considered and adjusted when adding or changing forklift attachments. Manufacturers of forklift attachments usually offer calculators available online to estimate the safe lifting capacity when using a particular attachment. However, only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. There will be a new specification plate that is factory authorized once the forklift manufacturer has re-rated the machine. The upgraded specification plate replaces the original plate and needs to be installed with the new forklift rating showing.
Equipment Upgrades
It is vital to note when working with forklift attachments the equipment’s hydraulic function consists of a forklift valve that has a lever located near the operator which creates two areas for pressurized hydraulic passages for oil. While not all forklift attachments are hydraulic, hydraulic attachments often include more features than the forklift has valves. When this happens, the forklift needs to have one or more valves added. There are numerous ways a valve can be added. There are many ways to add a forklift valve.Equipment manufacturers make forklift accessories for hose routing and valve placement. There are plenty of labor and parts involved which can be costly enough to make this an impractical solution. Other options include adding a cable reel and a hose in conjunction with a solenoid valve to divert oil from an existing location. Unfortunately, hose and cable reels can sometimes block the operator's view and can be easily damaged. Special hoses and a solenoid valve kit an be used to create an electrical conduit out of the reinforced braid. Since these hoses replace existing forklift hoses, they remain safe from external damage while maintaining clear vision for the operator.
Safety Considerations
Prior to fitting any type of forklift attachment, proper training must be obtained. Operators need to be competent with removing, operating and fitting the attachment before using it.
Before using any forklift attachment, two safety issues need consideration.
The nominal load rating will be reduced on the forklift once any attachment is applied. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Second, the center of gravity will be affected by the use of any forklift attachment. The forklift’s stability will be reduced and this needs to be computed for safety. Since the attachment’s weight is prominent in front of the fulcrum point on the forklift, the operator needs to drive the machine as though it is partially loaded even before it is carrying a load. Thus, when using any attachment, an operator should travel at a slow speed and make turns slowly and gently. As noted above, each attachment should be listed on the data plate of the forklift’s capacity.
Certain safety checks need to be done before using any kind of attachment. The forklift attachment must be permitted on the forklift’s data plate, locked properly, correctly attached, appropriate for the particular load and appropriate for the type of forklift being used.
List of Common Forklift Attachments
Below is a list of popular forklift attachments and their general uses. There are numerous forklift attachments and this list will cover the most popular. The variety of attachments can drastically increase efficiency for many jobs.
SIDESHIFTER:
Allows the operator to move the forks laterally, allowing for easier placement of a load without the need to reposition the entire forklift.
FORK POSITIONERS:
Fork positioners allow the forks to travel apart or together with each other to adjust for different load sizes.
DIMENSIONING DEVICES:
Provide dimensions for the cargo allowing for more efficient use of warehouse and truck trailer space and often used in conjunction with billing systems based on volume.
ROTATOR:
Rotators help to right tilted skids and are useful for fast unloading and tackling custom load requirements. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
The roll and barrel clamp allows the forklift to grasp rounded loads including barrels. It is outfitted with different pressure settings to facilitate fragile options and often has a rotate function to simplify horizontal and vertical positioning.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Pole attachments are long metal poles in place of the forks. They are useful for picking up linoleum and rolled up carpet or similar items.
SLIP SHEETER OR PUSH-PULL:
Allows operator to transport slip sheets by clamping onto slip sheets, as opposed to pallets, and either pulling the slip sheet onto wide and thin metal forks for loading or pushing the slip sheet to unload. Some variations of the attachment are Save, where the slip sheet is removed for reuse, or Standard.
DRUM HANDLER:
Allows for grasping drums, either with a spring-loaded jaw to grip the top lip of a drum, or with arms that encircle the drum, for transport.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper is designed for easier transport of liquid items or loose materials into bigger containers.
MAN BASKET:
Lift platform meant for lifting workers and complete with railings and brackets for safety harnesses.
TELESCOPIC FORKS:
The telescopic forks are used in locations with a two pallet stacking design were one shelf is placed right behind another with no aisle between them.
SCALES:
Scales are helpful for allowing operators to transport pallets while weighing them. This stops the need for interrupting work with regular travel to the scales. It can be used in legal-for-trade weights for operations that bill by how much items weigh.
SINGLE-DOUBLE FORKS:
Single-double forks facilitate movement of a single platform or pallet or two side-by-side pallets. This is useful for transporting specialty items with the right attachments employed. It can be used with normal lifting tasks and stops the need for owning two separate machines. This greatly reduces the cost of maintenance and operation that is used with multiple forklifts.
SNOW PLOW:
Designed for snow removal and distribution but can also be used to move other types of loose material.
SKIPS:
Allows safe and speedy removal of waste to the appropriate skip or waste compactor. Skips are available in a roll-forward type and a bottom-emptying type.
BOOMS AND JIBS:
Jibs and boom offer extended forklift reach for transporting loads that are stacked deep or high or that are suspended. There are reach-over, low profile, precision lifting and extendable length options.
Forklift Attachment PDF
