The TX Series 24 inch L.C. Series of Industrial Pneumatic Lift trucks were designed and engineered with focus on operator and service personnel at the forefront. The TX Series provides basic features like increased head room and leg room, tilt steering wheel, shock mounted center mounted operator station, CANbus technology for operator comfort and convenience and increased head and leg room, in addition to fingertip electric joystick controls. The TX Series is offered in 5 various wheel bases, so there is certainly a unit right for your particular application.
All controls on the machinery are integrated using solid state controllers with J1939 CANbus technology. This configuration allows controllers and sensors the ability to communicate with less wiring between the components. For example, I/O modules are great to add consistency to the control system of the machine and utilized to eliminate electromechanical relay devices.
The J1939 CANbus technology enables all equipment data to be accessed through the main color display that is located in the cab. This display shows engine data together with warnings, spreader status lights and machine and man interface data. The machinery functions could be tuned through the main display in the cab. Also, the display allows service personnel to access data required while troubleshooting. Like for instance, information such as sensor status and controller outputs. So as to avoid operator access, the tuning functions are protected by a password.
Every unit within the TX Series line of forklifts uses an electronic turbocharged Tier Certified Cummins, charge air to air or after-cooled diesel engine. Some of the basic engine features comprise maintenance monitor, electronic diagnostic monitor, transmission/engine protection systems, water/fuel separator, less emissions and better fuel economy.
The TX Series has a transmission which is a 3-speed, fully reversing, modulated powershift transmission. The inching powershift transmission and the electric roll shift control as well as a separate air-to-oil cooler. All of these features make a durable and efficient machine which is extremely dependable on the jobsite.